Laser printers are widely known for producing high-quality prints of pictures and text. They make use of toner, which, when emptied, affects the performance of the printer. Most printer owners typically discard empty toner cartridges, however, as this seems wasteful, we have written this guide to help you refill your Brother TN660 cartridge. It is relatively easy and uncomplicated and will not only save you time and money but also help the environment by helping you produce less waste.
Also referred to as TN630, the Brother TN660 cartridge can print up to 2,600 pages, with each one having about five percent coverage. Although refilling a toner cartridge has many benefits, keep in mind that this can only be done twice or thrice. Refilling a toner cartridge too many times will have a negative effect on the quality of your printer’s output. Read on to know how to refill your Brother TN660 cartridge step by step.
First, you will want to carefully remove your cartridge from its place in the printer. Next, find the holding tank, this is a hole that will be covered with a plug. No worries, for this plug can easily be removed. Then, take it off, and pour the toner into the hole until all of the toner is inside. Put the plastic plug back in then gently shake your cartridge. Remember to hold it horizontally so that the toner powder will be distributed evenly. Finally, install the cartridge into your printer once more. Easy, right? Just remember to be careful.
